Laser Hardening Services: Selective Surface Hardening Without Distortion
Many steel and cast-iron parts fail at the surface—through wear, scuffing, or fatigue—long before the core is stressed. Selective surface hardening fixes exactly that, and laser hardening services do it with minimal distortion and no whole-part heat cycle. This guide explains when laser hardening beats the older methods and how to apply it to gears, […]
Case Hardening Services: Build a Wear-Resistant Surface on a Tough Core
Case hardening is the fastest way to make a steel part survive abrasion, fatigue, and impact without turning the whole component brittle. By enriching and hardening only the outer layer while keeping a tough, ductile core, you get components that shrug off surface wear yet still absorb shock underneath. Our case hardening services cover carburizing, […]
Flame Hardening Services: Localized Surface Hardening for Steel Parts
Flame hardening services selectively harden the surface of steel parts using a direct flame followed by rapid quench. It is the practical choice for large, heavy components — gear teeth, ways, rolls, and shafts — where you need a wear-resistant skin over a tough, shock-absorbing core. For buyers, flame hardening delivers localized hardness without treating […]
Nitriding Services: Low-Distortion Surface Hardening for Steel Parts
Every engineer who has watched a precision gear come back from carburising with 0.15 mm of distortion understands the appeal of nitriding services. Nitriding hardens the surface of a steel part at 500-570 °C, well below the transformation temperature, so there is no quench and almost no dimensional movement. You get a wear-resistant, fatigue-resistant, corrosion-resistant […]
