Aluminum Fabrication Services: Cutting, Bending, Welding & Finishing Custom Aluminum Parts
Aluminum is the default choice for lightweight, corrosion-resistant, and thermally efficient parts—but only if the fabrication route matches the design. Aluminum fabrication services span cutting, bending, joining, extruding, and finishing, and the right combination decides both cost and performance. This guide explains how to sequence those steps for prototypes and production alike, and where aluminum […]
MIG vs TIG Welding: Which Is Right for Your Metal Part?
MIG vs TIG Welding: Which Is Right for Your Metal Part? Buyers ask us constantly: should this part be MIG or TIG welded? There is no universal winner – only the right process for the alloy, thickness, volume, and appearance your part demands. Both use a shielding gas and a consumable (MIG) or non-consumable tungsten […]
TIG Welding Aluminum: Complete Settings & Technique Guide
TIG Welding Aluminum: Complete Settings & Technique Guide Aluminum is one of the most weldable metals and one of the easiest to get wrong. Its soft oxide skin, high thermal conductivity, and low melting point punish sloppy setup with porosity, cracking, and weak beads. TIG welding services remain the preferred process when the joint must […]
TIG Welding Services: Precise, Clean Welds
TIG Welding Services: Precise, Clean Welds TIG welding (GTAW) uses a non-consumable tungsten electrode and a separate filler to lay precise, clean welds with no spatter—the choice for thin, exotic, and appearance-critical joints. For aerospace, medical, and fine fabrication, it sets the quality bar. This guide covers how it works, when to choose it, the […]
