Custom Metal Junction Boxes: Fabrication, Materials & Sealing Standards
Junction boxes protect electrical connections from dust, moisture, impact, and tampering. In industrial, solar, and infrastructure settings, the metal box itself is a critical safety component, not an afterthought. This guide covers how custom metal junction boxes are fabricated, which materials and seals to specify, and the standards that govern them so your install passes […]
Metal Finishing Selection Guide: Plating, Anodizing & Coating
The last operation often decides whether a part survives in the field. A metal finishing choice protects against corrosion, cuts wear, or simply makes a product look right. With so many options—anodizing, powder coating, plating, PVD—this guide compares them on what they actually deliver so you can pick the finish that matches your environment and […]
Anodizing vs Painting: Choosing a Metal Finish
The finish on a metal part decides how it looks and how long it lasts, and the anodizing vs painting choice is one engineers face constantly. Anodizing grows a hard oxide layer into the aluminum; painting lays a coating on top. Both protect, but differently. This guide compares them so you can specify with confidence. […]
Powder Coating vs Wet Painting: Picking a Durable Metal Finish
Every fabricated metal part eventually faces the same finishing question: powder coat it or paint it? Both protect the surface and add color, but they behave nothing alike in service. Powder coating bakes a dry polymer film into a thick, cross-linked barrier that shrugs off chips and corrosion for 15–25 years outdoors. Wet paint is […]
Custom Sheet Metal Enclosures: Cabinets, Boxes & Housings
From electrical cabinets to sensor housings, custom sheet metal enclosures protect electronics and mechanisms across every industry. Laser cutting, bending, welding, and coating turn flat sheet into rigid, precise boxes — faster and cheaper than molded or machined alternatives for low-to-mid volume. This guide covers materials, the fabrication process, finishing, and how to get an […]
Custom Metal Boxes & Enclosures: Fabricated, Finished, and Ready to Ship
When off-the-shelf enclosures will not fit your electronics, sensor, or control package, custom metal boxes give you the exact footprint, mounting, and ingress protection you need. We build boxes and enclosures from steel, stainless, and aluminum using laser cutting, press braking, and welding, then finish them to survive the environment they live in. The result […]
Metal Fabrication Services: Cutting, Bending, Welding & Finishing
Metal fabrication turns flat stock and profiles into the enclosures, brackets, frames and assemblies that house your product. Our metal fabrication services combine cutting, bending, welding and finishing under one roof, so a part moves through the shop without being shipped between vendors. Here is what a complete fabrication programme looks like. What Metal Fabrication […]
Anodizing vs. Powder Coating: Which Finish Should Your Metal Part Use?
Anodizing vs. powder coating is the finish question almost every aluminum and metal-part buyer eventually faces. Both protect and beautify, but they do it in fundamentally different ways: anodizing grows a hard oxide layer from the metal itself, while powder coating lays a baked polymer film on top. The right choice depends on the substrate, […]
Custom Metal Chassis: Fabricated Frames That Hold Electronics and Mechanics
A custom metal chassis is the skeleton a product is built on. It locates the electronics, carries the loads, sheds the heat, and protects the internals, so its stiffness, grounding, and fit decide whether assembly is smooth or a fight. This article explains how a chassis moves from flat sheet and tube to a rigid, […]
Custom Metal Panels: Laser Cut, Bent, and Finished Enclosure Faces
Custom metal panels are the visible skin of almost every machine: enclosure doors, mounting plates, control faces, and brackets. Getting the cut, bend, and finish right the first time means the panel drops onto the product without rework. This guide covers how to specify holes, bends, and coatings so a panel that looks simple on […]
